HP StorageWorks XP Remote Web Console Software User Manual
Page 36
Description
Color and font type
Used for the copy function of LUN Manager. For more information, see the HP
StorageWorks XP24000/XP20000 LUN Manager User’s Guide.
Green bold
•
You can create and store up to 20,000 settings or operations before actually applying them to
the storage system. To avoid a possible error, do not apply more than 20,000 settings at a time.
•
The layout of a Remote Web Console window is reset when you click Apply, Cancel, Refresh (
),
or Refresh All (
) on the File menu, or when you switch tabs.
•
When you click Refresh All (
) on the File menu, the information on the SVP is also updated.
Therefore, the processing caused by Refresh All (
) on the File menu can take some time.
•
If there is a difference between the configuration information displayed on the Remote Web
Console and the actual configuration information that can be recognized from the host, the con-
figuration information displayed on the Remote Web Console can be updated by clicking Refresh
All (
) on the File menu.
•
Do not change the clock time of the Remote Web Console computer while you are using Remote
Web Console.
Log in to Remote Web Console again after you have changed the clock time of the Remote Web
Console computer.
•
When the microcode is being updated on the SVP, you must exit and restart all web browsers on
the Remote Web Console.
•
If a Remote Web Console user is applying settings, you cannot log in to the Remote Web Console
until after those settings have been applied. A wait of longer than five minutes indicates an abnormal
end, in which case you need to exit and restart the browser.
•
When an internal process is being executed on the SVP (for example, a configuration change,
option selection, or an operational information query), Remote Web Console processing might
be temporarily delayed.
•
If you request a change to the storage system configuration while another change is being made,
an error message is displayed.
• If the error occurs while you are logging in or clicking Apply to implement changes, wait for
a few minutes, and then retry the operation.
• If the error occurs while you are either switching between Modify mode and View mode or
switching tabs, wait for a few minutes, click Refresh (
) on the File menu, and then retry the
operation.
•
If you remain in Modify mode for a certain period of time without making any changes (the default
is 30 minutes), the storage system releases the Modify mode, and you are returned to View mode.
(You can change the timeout period.) After the Modify mode is released, an error occurs if you
attempt the following actions: clicking Apply, Refresh (
), or Refresh All (
) on the File menu,
or mode changing buttons (
or
). You can only see information on Remote Web Console.
•
When the HP StorageWorks XP Business Copy Software or Hitachi ShadowImage™ for Mainframe
quick restore operation is being performed, a Remote Web Console window may display old in-
formation (status before the quick restore operation) on logical volume (LDEV) configurations. In
this case, wait until the quick restore operation completes, and then click Refresh (
) or Refresh
All (
) on the File menu to update the Remote Web Console window.
Installation Requirements and Procedures
36