HP StorageWorks XP Remote Web Console Software - Manual (Page 123)

1. Log in to Remote Web Console, and open the E-mail Information window (see Figure
37 on page 91).
2. Change to Modify mode (see “ Changing Between View Mode and Modify Mode ” on page 48).
3. Make sure that Mail Notice is set to Enable and that the settings in the window is correct.
4. Click Test Send. A confirmation message appears.
5. Click OK.
6. Confirm that mail clients received the email with the reference code 7FFFFF.
An example of a test email is as follows:
Date: FRI 03 OCT 2008 10:10:10 +9000 (JST)
To: [email protected]
From: [email protected]
Reply-To: [email protected]
Subject: XP Disk Array Report
Date : 03/10/2008
Time : 10:09:30
Machine : HP-XP-DiskArray(Seq.# 11111)
RefCode : 7FFFFF
Detail: This is Test Report.
Table 21 Details of Email for SIMs Notice
Description Item #
Date and time when an e-mail was sent. The mail server decides this
information.
Date 1
Email address of the receiver. To 2
Email address of the sender. From 3
Email address to which replies from the receivers will be sent. Optional. Reply-To 4
Email title. Cannot be changed. . Subject 5
Date when a SIM occurred. Date 6
Time when a SIM occurred. Time 7
Name and serial number of the storage system. Machine 8
Reference code. The same code as the one reported by SNMP traps. RefCode 9
SIM details. The same information as the one reported by SNMP traps. Detail 10
See the HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide for reference codes
and failure details.
XP24000/XP20000 Remote Web Console User's Guide 123