HP StorageWorks XP Remote Web Console Software - Manual (Page 108)

Description Item
If the user cannot access the SVP for a certain period of time because of a network
error, the RMI time-out logs the user out of the SVP. This has the following parameters:
• The default is 1 minute. You can specify 1 minute, 5 - 60 minutes in 5-minute incre-
ments, 70 to 120 minutes in 10-minute increments, or One day (24 hours).
• The value of the RMI time-out period must be greater than the value set for the
smallest polling period, either for checking exclusive lock or for checking obstacles
(see below for those parameters). For example, specify a value of the RMI time-out
period to satisfy the following condition: RMI time-out period > min [
A, B], when
A = Polling period for checking exclusive lock, B = Polling period for checking
obstacles, and min [
A, B] indicates the minimum value selected from A and B.
You cannot disable this parameter.
RMI time-out period
- If a user is in Modify mode but does not make any changes that access the RMI server
for a specified period of time, Modify mode is released, and the View mode appears.
• The default time period is 30 minutes. You can specify between 10 and 60 minutes
in 10-minute increments, or between 120 and 360 minutes in 60-minute increments.
• Specify No to disable this parameter.
RMI time-out period
for Modify
Specify the polling period for monitoring who is changing information while in Modify
mode when other users are viewing the storage system information in View mode.
The Locked and Unlocked icons are automatically updated either when a user who is
in Modify mode logs out from Remote Web Console or changes to View mode (see
“
Icons ” on page 64).
NOTE:
The shorter the time period you specify, the more frequently the Lock/Unlock
status is updated, but this does increase network traffic.
• The default time period is 35 seconds. You can specify 5 to 60 in 5-second incre-
ments, or 70 to 120 in 10-second increments.
• Specify NO to disable this parameter.
Polling period for
checking exclusive
lock
Specify a time interval to monitor the Disk Controller and Disk Array Unit status, which
is displayed by the status lamp icon on the Alerts window of the Remote Web Console
main window.
• The default time period is 110 seconds. You can specify 5 to 60 seconds in 5-
second increments, and 70 to 120 seconds in 10-second increments for the para-
meter.
• Specify NO to disable this parameter.
NOTE:
HP recommends that you select NO when the Option to hide Alerts window
check box is selected.
Polling period for
checking obstacles
Specify whether to display the Alerts window (see Figure 30 on page 79). If the Hide
Alerts window check box is selected, the Status tab does not appear in the Remote
Web Console main window. By default, the check box is cleared.
NOTE:
HP recommends that you select NO for Polling period for checking obstacles
when the Option to hide Alerts window check box is selected.
Option to hide Alerts
window
Submits the settings that you have set.
You need to log out from Remote Web Console once and log in again for the new
settings to take effect.
Submit
Using the Remote Web Console GUI 108