HP StorageWorks XP Remote Web Console Software - Manual (Page 94)

Description Item
The field displays whether or not there is an error in the imported spreadsheet. If there
are no errors, the Apply button becomes available. The available status conditions are:
• Error
• Ready
Status
Applies the settings in the imported spreadsheet. The settings become available only
when a spreadsheet without detected errors is imported, and implements the settings
in the imported spreadsheet.
Apply button
Cancels the settings and returns you to the original status of the Configuration File
Loader window.
Cancel button
Reports Display Dialog Boxes
The Reports Display dialog box displays the basic configuration information for the storage system.
When you log in as a storage partition administrator, the information on the allocated SLPR is displayed.
The Reports Display dialog box is displayed apart from the Remote Web Console main window;
therefore, it can be displayed regardless of the operation of the Remote Web Console options. For
example, when you perform the setting operation for one of the Remote Web Console options, you
may need to check the existing setting information on the ports or LUNs. In this situation, you can
display the Reports Display dialog box and look at the basic configuration information at the same
time you perform the operation.
To open the Reports Display dialog box, log in to the Remote Web Console, and then select File and
Reports from the menu bar of the Remote Web Console main window. For detailed information about
each dialog box, see the following subsections.
Following is the description on the Reports Display dialog box:
• The information displayed on the Reports Display dialog box is updated:
• when a tab is clicked on the Reports Display dialog box and the displayed dialog box is
changed.
•
when the Refresh command ( ) on the menu bar of the Remote Web Console main window
is clicked.
• when a tab is clicked on the Remote Web Console windows during the operation of the product
option and the displayed dialog box is changed.
• when the Apply button is clicked on the Remote Web Console main window.
• when the operation mode is changed from View mode to Modify mode on the Remote Web
Console main window.
Common Elements
Reports Display dialog box displays the following items.
• If the volume is a LUSE volume, you can display the detailed information for the LUSE volume. If
you select a LUSE volume in the list on the LUN dialog box or the LDEV dialog box, and right-click,
the Detail Information command is displayed. When you select the Detail Information command,
the detailed information for the LUSE volume is displayed. For a description of the displayed in-
formation, see “
Detail Information Dialog Box ” on page 105.
Using the Remote Web Console GUI 94