HP StorageWorks XP Remote Web Console Software - Manual (Page 89)

Description Item
You can set the folder location in which to save the audit log file. The folder location
should be relative to a home directory of a FTP server user. The default is root (/)
and is the home directory. You can enter up to 256 alphanumeric characters and
symbols (ASCII codes) for the output folder.
Primary Server Output
Folder
When you click Transfer, the audit log file is selected on the Audit Log Transfer
window. You can transfer the current audit log file without waiting for the audit log
file to reach the threshold size for automatic transfer.
Transfer to Primary
Server
You can specify whether to transfer the audit log file to the secondary FTP server.
To transfer the file, select Enable. To not transfer the file, select Disable. Output to Secondary
Server
You can set an IP address for the secondary FTP server. Once you set Output to
Secondary Server to Enable, IP becomes available. The default IP address has been
entered, so change it as needed. The restriction for the available values is the same
as that of Primary Server Setting.
Secondary Server Set-
ting
You can set UserID and Password to log into the secondary FTP server. The restriction
for the available values is the same as that of Primary Server Login User. Secondary Server Login
User
You can set the folder location to save the audit log file. The folder location should
be relative to a home directory of a FTP server user. The default is root (/). The
restriction for the available values are the same as those of Primary Server Output
Folder.
Secondary Server Out-
put Folder
When you click Transfer, the audit log file is transferred to the secondary FTP server,
according to the settings selected on the Audit Log Transfer window. You can transfer
the current audit log file without waiting for the audit log file to reach the threshold
size for automatic transfer.
Transfer to Secondary
Server
The Request button allows you to complete (resolve) the SIM which occurs when a
transfer of audit logs to any FTP server fails. Resolve the error condition, manually
transfer the audit log file by clicking Transfer, and then complete the SIM. The SIM
status will change to Complete.
IMPORTANT:
If you do not complete the SIM, the SIM will not occur the next time an FTP
transfer fails.
SIM Complete
Makes all the changes or settings effective. This button is available only when you
are in the modify mode.
Apply
Cancels the changes or settings. This button is available only when you are in the
modify mode.
Cancel
Audit Log Setting Window
The Audit Log Setting window allows you to configure the setting for the audit log. Only the storage
administrator with Audit Log Administrator Role set to Modify can configure the audit log setting in
this window. If Audit Log Administrator Role is set to View, the storage administrator can view but
not change the setting of the Audit Log Setting window.
XP24000/XP20000 Remote Web Console User's Guide 89