HP StorageWorks XP Remote Web Console Software - Manual (Page 118)

118 LUN Manager operations
NOTE: You can stop the OS by right-clicking the channel adapter in the Package list and selecting Shut
Down instead of using the Shut Down button.
Starting a NAS channel adapter’s OS
1. Start LUN Manager, and display the Port pane ( Figure 23 ).
2. In the Package tree, select the NAS folder or a NAS channel adapter.
• If you select the NAS folder, the CHN list displays the NAS channel adapters in the array.
• If you select a channel adapter, the CHN list displays information about that channel adapter.
3. In the CHN list, select the channel adapter whose OS Status column contains DOWN or DOWN
(Failure). The Boot button is activated.
4. Click Boot. A confirmation message appears.
5. Click OK. The row selected in the CHN list appears in blue and the operation (Boot) appears in the
Setting column. Also, the channel adapter name to be started appears in blue in the Package tree.
6. Click Apply. A confirmation message appears.
7. Click OK. The selected NAS channel adapter’s OS starts.
During start processing, BUSY (Boot) appears in the OS Status column. If the OS starts, UP appears.
NOTE: You can start the OS by right-clicking the channel adapter in the Package list and selecting Boot
instead of using the Boot button.