HP StorageWorks XP Remote Web Console Software - Manual (Page 123)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 123
4. A list of attached Fibre Channel devices and their device file names appears.
Figure 77 HP-UX World Wide Name
Record the Fibre Channel device file name (for example, /dev/fcms0).
5. Use the
fcmsutil
command with the Fibre Channel device name to list the WWN for that Fibre
Channel device. For example, to list the WWN for the device with the device file name /dev/fcms0,
enter:
/opt/fcms/bin/fcmsutil /dev/fcms0
NOTE: When an A5158 Fibre Channel adapter is used, enter the following for the device name
at the command line prompt:
/usr/sbin/ioscan -fnC fc
6. Record the Fibre Channel device file name (for example, /dev/td0).
NOTE: When the A5158 Fibre Channel adapter is used, enter the following to list the WWN for
the device with the device file name:
/opt/fcms/bin/fcmsutil <device file name>
7. Record the WWN and repeat the above steps for each Fibre Channel device you want to use.
# /usr/sbin/ioscan -fnC lan
←
Enter the ioscan command.
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
lan 0 8/0.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage Cntl
/dev/fcms0
←
Device file name.
lan 4 8/4.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage Cntl
/dev/fcms4
←
Device file name.
lan 5 8/8.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage Cntl
/dev/fcms5
←
Device file name.
lan 6 8/12.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage Cntl
/dev/fcms6
←
Device file name.
lan 1 10/8/1/0 btlan4 CLAIMED INTERFACE PCI(10110009) -- Built-in #1
lan 2 10/8/2/0 btlan4 CLAIMED INTERFACE PCI(10110009) -- Built-in #2
lan 3 10/12/6 lan2 CLAIMED INTERFACE Built-in LAN
/dev/diag/lan3 /dev/ether3 /dev/lan3
# # fcmsutil /dev/fcms0
←
Enter the fcmsutil command.
Local N_Port_ID is = 0x000001
N_Port Node World Wide Name = 0x10000060B0C08294
N_Port Port World Wide Name = 0x10000060B0C08294
←
Record the WWN.
Topology = IN_LOOP
Speed = 1062500000 (bps)
HPA of card = 0xFFB40000
EIM of card = 0xFFFA000D
Driver state = READY
Number of EDB's in use = 0
Number of OIB's in use = 0
Number of Active Outbound Exchanges = 1
Number of Active Login Sessions = 2
#