HP StorageWorks XP Remote Web Console Software - Manual (Page 207)

NOTE:
The SSID number of another SLPR is used check box appears only when you log in as a storage
administrator and when there are two or more SLPRs.
NOTE:
You cannot enter a number in the Input SSID list when the SSID number of another SLPR is used
check box is cleared.
• Set: Sets the SSID you select or enter in the Input SSID list to the table. The Set SSID table displays
the new SSID.
• Back: Returns to Install CV pane (2).
• Next: Opens the Install CV pane (4) (confirmation pane).
• Cancel: Cancels the SSID setting, and returns to the Customized Volume pane.
Install CV pane (4)
Use this pane to confirm the settings of the CVS volumes to be created.
Figure 96 Install CV pane (4) for confirming Install CV settings
.
• CVS volume setting information table: Displays a list of CVS volumes to be created.
• VDEV: VDEV number for the CVS volume to be created.
NOTE:
If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group
that consists of one or more external LUs.
XP LUN Configuration and Security Manager User Guide 207