Changing a host group's name and host mode, Change host group dialog box – HP StorageWorks XP Remote Web Console Software User Manual
Page 102
Changing a host group's name and host mode
NOTE:
•
You cannot perform this operation on host groups for initiator ports.
•
You cannot perform this operation on host groups for NAS ports.
CAUTION:
Before changing a host group's host mode, HP recommends that you first back up data on the port
the host group belongs to. The operation for changing the host mode should not be destructive, but
data integrity cannot be guaranteed without a backup.
1.
Start XP LUN Configuration and Security Manager Software. The XP LUN Configuration and
Security Manager Software pane (
) appears.
2.
In the tree, right-click the host group, and select Change Host Group. The Change Host Group
dialog box appears.
Figure 47 Change Host Group dialog box
.
3.
To change the name of the host group, enter a new name in the Group Name box.
To change the host mode (
), select the new host mode from the Host Mode list.
XP LUN Configuration and Security Manager Software operations
102