HP StorageWorks XP Remote Web Console Software - Manual (Page 218)

Figure 102 Volume Initialize pane (1)
.
This pane has the following features:
• Normal volume-setting information table: On the upper right of the pane, displays detailed inform-
ation about the CVS volumes to be initialized.
• Parity Group: Number of the VDEV to be initialized. The VDEV number indicates the parity
group where the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV
belongs to parity group number 1-1.
NOTE:
If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group
that consists of one or more external LUs.
NOTE:
If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group
that consists of one or more virtual volumes (V-VOLs).
• No.: Setting number of the CVS volume to be initialized.
• Emulation: Emulation type of the CVS volume to be initialized.
• Capacity: Capacity of the CVS volume to be initialized in either MB for open-system volumes
or cylinders (Cyl) for mainframe volumes.
• CU:LDEV: CU and LDEV numbers for the CVS volume to be initialized. The default is blank.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
• Select LDEV No. area: Used to set LDEV numbers for the CVS volume to be initialized.
Custom Volume Size operations 218