HP StorageWorks XP Remote Web Console Software - Manual (Page 142)

2. In the Port tree, double-click the iSCSI folder, and select the port or iSCSI target on which the user
information you want to delete is registered. The user information for hosts currently registered
on the selected port or iSCSI target appears in the Authentication information (Host) list.
3. In the Authentication information (Host) list, right-click the user information item you want to delete,
and select Delete User Information (Host). The Delete Authentication Information pane appears.
Figure 73 Delete Authentication Information pane
. 4. Click OK.
5. Click Apply. A confirmation message appears.
6. Click OK. Settings are applied to the array.
Specifying an iSCSI target's user information (when performing mutual
authentication)
To perform mutual authentication, you must specify user information for iSCSI targets on the array's
ports. Specify unique user information for each iSCSI target. You can change the specified user
information for iSCSI targets the same way you specified them initially.
1. Start XP LUN Configuration and Security Manager Software, and display the Authentication pane
(
Figure 30 ).
2. In the Port tree, select the port or iSCSI target whose user information you want to specify. The
currently registered user information for the selected port or iSCSI target appears in the
Authentication information (Target) list.
XP LUN Configuration and Security Manager Software operations 142