HP StorageWorks XP Remote Web Console Software User Manual

Page 132

Advertising
background image

Host group's setting in the Port tree: enable (

) or disable (

)

Whether or not the user information for the host that attempts to connect is registered on the host
group

Table 17

shows the relationship between combinations of host group settings and connection results

in authentication of hosts. Regardless of whether or not the host is configured for authentication by
ports with CHAP, the connection results are as follows, unless otherwise noted.

Table 17 Combinations of port settings and connection results (Fibre Channel environments)

Connection results

Host settings

Port settings

Host's user information

Authentication: at host
group

Connected if the au-
thentication of the
host succeeded

Registered

Registered

Enable

Failed to be authentic-
ated and cannot be
connected

Not registered

Registered

Enable

Failed to be authentic-
ated and cannot be
connected

Registered

Not registered

Enable

Connected without
authentication of the
host

2

1

1

Disable

1

This item does not affect the connection results, or cannot be specified.

2

If a host is configured for authentication by ports with CHAP, authentication of the host fails. To allow such a host to connect

to the port without authentication, do not configure it for authentication by ports with CHAP.

For more information about authentication of hosts, see

Authentication of hosts (Fibre Channel

environments)

.

Settings and connection results in authentication of Fibre Channel switches

During authentication of hosts, the connection result is determined based on the combination of the
following port settings:

Port's setting in the Port tree: enable (

) or disable (

)

Whether or not the user information for the Fibre Channel switch that attempts to connect is re-
gistered on the port

Table 18

shows the relationship between combinations of port settings and connection results in

authentication of Fibre Channel switches. Regardless of whether or not the host is configured for

XP LUN Configuration and Security Manager Software operations

132

Advertising
This manual is related to the following products: