HP StorageWorks XP Remote Web Console Software - Manual (Page 229)

5. From the Install CV pane (1) for other than OPEN-V, do the following:
a. In the Emulation Type list, select the emulation type.
b. In the Capacity box, enter the capacity of the CVS volume you want to create, either in MB
or blocks for open systems or in cylinders (Cyl) for mainframe volumes. The available capacity
range (minimum - maximum) appears on the right of the Capacity box. The value can be
incremented by 1 MB or block for open systems or by 1 Cyl for mainframe systems.
NOTE:
The Install CV function allocates CVS volumes in the order in which the function finds
sufficient free space for the CVS volumes. For optimum space allocation, allocate CVS
volumes in descending order of capacity.
c. Click Set to display the setting in the LDEV Information table. To remove CVS volume settings
displayed in the LDEV Information table, do the following:
• To remove a setting, select the CVS volume, and click Delete. When a confirmation
message appears, click OK.
• To remove all settings, click Clear. When a confirmation message appears, click OK.
d. To create other CVS volumes, repeat step 5a through step 5c. After setting all CVS volumes,
go to step 6.
6. Click Next. The Install CV pane (2) appears.
7. Select one or more CVS volume numbers to assign CU and LDEV numbers.
8. In the Select CU No. list, select a CU number.
9. In the Select LDEV No. table, select an LDEV number from the white LDEV numbers. Gray indicates
LDEV numbers that are not selectable, white indicates unused LDEV numbers, and blue indicates
available LDEV numbers. The CU and LDEV numbers appear in the CU:LDEV field of the CVS
volume-setting information table.
NOTE:
You cannot specify an LDEV number if free LDEV numbers in LUSE configuration are not
available in the selected CU.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
10. To set other CVS volumes, repeat step 7 through step 9. To remove a CU:LDEV number that is
already assigned, select one or more CVS volume numbers corresponding to the CU:LDEV numbers
you want to remove, right-click, and select Clear.
11. After setting all CU and LDEV numbers, click Next. If the selected LDEV number's boundary area
does not have an SSID, the SSID setting pane appears. Go to step 12. If the selected LDEV
number's boundary area has an SSID, go to step 16.
12. On the SSID setting pane, select the CU number.
XP LUN Configuration and Security Manager User Guide 229