HP StorageWorks XP Remote Web Console Software - Manual (Page 219)

• Select CU No.: CU number. The default is CU 00. The LDEV number settings for the selected
CU number appear in the Select LDEV No. table.
• Interval: When selecting more than one volume, used to set the interval between the LDEV
numbers to be assigned to the newly created volumes. The default value is 0. When you select
0, consecutive LDEV numbers are assigned.
NOTE:
The value you specify as the interval between LDEV numbers counts only available LDEV
numbers and skips those that are not selectable.
• Select LDEV No. table: Displays the LDEV number settings for the CU number selected in Select
CU No. Gray indicates LDEV numbers that are not selectable, white indicates unused LDEV
numbers, and blue indicates available LDEV numbers. You can select an LDEV number from
the white LDEV numbers in the table. When you set the LDEV number, that LDEV number becomes
available and changes to blue.
NOTE:
LDEV numbers that are not selectable may be already in use or already assigned to the other
emulation group (grouped by 32 LDEV numbers) (see
Table 37 ).
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
• CU number of another SLPR is used: When selected, you can select the number of an LDEV that
does not exist in the SLPR to which the parity group does not belong. When cleared, you can only
select the number of an LDEV in the SLPR to which the parity group belongs.
NOTE:
The CU number of another SLPR is used check box appears only when you log in as a storage
administrator and when there are two or more SLPRs.
• Next: Opens one of the following panes:
• If the selected LDEV number's boundary area does not have an SSID, the Volume Initialize
pane (2) for setting an SSID appears.
• If the selected LDEV number's boundary area has an SSID, the Volume Initialize pane (3) ap-
pears.
• Cancel: Cancels the settings for the LDEV, and returns to the Customized Volume pane.
• Clear: Removes a CU:LDEV number that is already assigned. To remove a CU:LDEV number, right-
click a CVS volume number corresponding to the CU:LDEV number you want to remove, and select
Clear.
XP LUN Configuration and Security Manager User Guide 219