HP StorageWorks XP Remote Web Console Software - Manual (Page 109)

5. If necessary, select Apply this change to other ports, too.
If this check box is selected, the change in the pane also affects other ports. For example, suppose
the same host bus adapter (that is, the same iSCSI name) is located below ports CL1-A and CL2-A
in the tree. If you select the host bus adapter (or iSCSI name) from below one of the ports and
change the nickname to hba1, the host bus adapter below the other port is also renamed to
hba1.
NOTE:
The change in the pane does not affect any port that satisfies one of the following conditions:
• The resulting nickname is already used as the nickname of a host bus adapter connected
to the iSCSI target.
• The resulting iSCSI name exists in the port.
6. Click OK. If a confirmation message appears, click OK. Changes appear in blue in the tree.
NOTE:
If you select Apply this change to other ports, too and click OK, a pane appears ( Figure
54 ) listing the host bus adapters to be changed. To make changes, click OK. If not, click
Cancel.
Figure 54 Check iSCSI names dialog box
. 7. Click Apply. A confirmation message appears.
8. Click OK. Changes are applied to the array.
XP LUN Configuration and Security Manager User Guide 109