HP StorageWorks XP Remote Web Console Software User Manual
Page 99
4.
In the LDEV table, select a logical volume. In the LU Path table, select LUNs indicated by the
icon (this icon indicates a LUN to which no LU path is defined). Click Add LU Path.
A message appears displaying information about LU paths to be defined.
NOTE:
• If you are using Windows, you can drag a logical volume from the LDEV table to a LUN
(
) in the LU Path tree. To drag more than one logical volume, see the
HP StorageWorks
XP Command View Advanced Edition Software user guide for XP Disk Arrays or the HP
StorageWorks XP Remote Web Console user guide for XP12000/XP10000 Disk Arrays
and SVS 200 for instructions.
• When you use the LU Path tree, you can use the CU list to switch between CU images.
Figure 43 Information about LU paths to be defined (Fibre Channel environment)
.
Figure 44 Information about LU paths to be defined (iSCSI environment)
.
5.
Click OK. Settings are shown in the LU Path table, but not applied to the array yet.
6.
Click Apply. A confirmation message appears.
XP LUN Configuration and Security Manager User Guide
99