HP StorageWorks XP Remote Web Console Software - Manual (Page 112)

3. Check to see if Concatenation List appears in the shortcut menu.
• If Concatenation List appears, the logical volume is dispersed across parity groups. Select
Concatenation List to view a list of the parity groups.
Figure 55 Concatenation List pane
.
• If the Concatenation List command does not appear, the logical volume is not dispersed across
parity groups.
Defining and viewing alternate paths
Use XP LUN Configuration and Security Manager Software to define alternate paths. If an LU path
fails, you can switch to its alternate path.
To create an alternate path, you must copy the original path from one port to another. For example,
to define an alternative for the LU path from port CL1-A to logical volume 00:01, you must copy the
LU path from port CL1-A to another port.
Copying paths from one Fibre Channel or iSCSI port to another
To use alternate paths, you must copy LU paths from one port to another.
CAUTION:
Before performing the following steps, see Notes on using LUN Manager for important information.
CAUTION:
To define alternate paths when XP Secure Manager is disabled, you must redefine the LU path.
1. Start XP LUN Configuration and Security Manager Software. The XP LUN Configuration and
Security Manager Software pane (
Figure 14 or Figure 15 ) appears.
2. In the tree, double-click the copy source port to display host groups or iSCSI targets below the
port.
XP LUN Configuration and Security Manager Software operations 112