HP StorageWorks XP Remote Web Console Software - Manual (Page 139)

4.
Right-click an iSCSI target displayed with , and select Authentication Disable -> Enable. The
iSCSI target's icon changes to , and the port name appears in blue.
5. Click Apply. A confirmation message appears.
6. Click OK. Settings are applied to the array.
To return the iSCSI target setting to , perform the same operation, except select Authentication
Enable -> Disable in step 4.
Registering a host's user information on an iSCSI target
On an iSCSI target that performs authentication of hosts, register the user information for all hosts that
you allow to connect.
1. Start XP LUN Configuration and Security Manager Software, and display the Authentication pane
(
Figure 30 ).
2. In the Port tree, select the port or iSCSI target on which you want to register a host's user
information. The user information for hosts currently registered on the selected port or iSCSI target
appears in the Authentication information (Target) list.
You can register a host's user information even if the port status is . In this case, however, the
host's registered user information is ignored.
XP LUN Configuration and Security Manager User Guide 139