HP StorageWorks XP Remote Web Console Software - Manual (Page 234)

5. On the Make Volume pane (1) for other than OPEN-V, do the following:
a. In the Emulation Type list, select the emulation type.
b. In the Capacity field, enter the capacity of the CVS volume you want to create, either in MB
or block for open systems or in cylinders (Cyl) for mainframe volumes. The available capacity
range (minimum - maximum) is shown on the right of the Capacity field. The value can be
incremented by 1 MB or block for open systems or 1 Cyl for mainframe systems.
c. Click Set to display the setting in the LDEV information table. To remove CVS volume settings
displayed in the LDEV information table, do the following:
• To remove a setting, select the CVS volume, and click Delete. When a confirmation
message appears, select OK.
• To remove all settings, click Clear. When a confirmation message displays, click OK.
d. To create other CVS volumes, repeat step 5a through step 5c. After setting all CVS volumes,
go to step 6.
6. Click Next. The Make Volume pane (2) appears.
7. Select one or more CVS volume numbers to assign CU and LDEV numbers.
8. In the Select CU No. list, select a CU number.
9. In the Select LDEV No. table, select an LDEV number from the white LDEV numbers. Gray indicates
LDEV numbers that are not selectable, white indicates LDEV numbers, and blue indicates available
LDEV numbers. The CU and LDEV number appear in the CU:LDEV field of the CVS volume-setting
information table.
NOTE:
You cannot specify an LDEV number if free LDEV numbers in the LUSE configuration are
not available in either of the following CUs:
• The CU displayed in the Select CU No. list.
• A CU whose CU number is larger than the CU number displayed in the Select CU No.
list.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
10. Repeat step 7 through step 9 to set other CVS volumes. To remove a CU:LDEV number that is
already assigned, select one or more CVS volume numbers corresponding to the CU:LDEV numbers
you want to remove, right-click, and select Clear.
11. After setting all CU and LDEV numbers, click Next. If the selected LDEV number's boundary area
does not have an SSID, the SSID setting pane appears. Go to step 12. If the selected LDEV
number's boundary area has an SSID, go to step 17.
12. On the SSID setting pane, select the CU number.
Custom Volume Size operations 234