HP StorageWorks XP Remote Web Console Software - Manual (Page 107)

4.
In the tree, right-click a host bus adapter ( ), and select Change WWN & Nickname. The
Change WWN & Nickname dialog box appears.
Figure 51 Change WWN & Nickname dialog box
. 5. To change the WWN, enter a new WWN or select another WWN from the WWN list.
To change the nickname, enter a new nickname In the Nickname box.
6. If necessary, select Apply this change to other ports, too.
If this check box is selected, the change in the pane also affects other ports. For example, suppose
that the same host bus adapter (that is, the same WWN) is located below ports CL1-A and CL2-A
in the tree. If you select the host bus adapter (or WWN) from below one of the ports and change
the nickname to hba1, the host bus adapter below the other port is also renamed to hba1.
NOTE:
The change in the pane does not affect any port that satisfies one of the following conditions:
• The resulting nickname is already used as the nickname of a host bus adapter connected
to the port.
• The resulting WWN exists in the port.
XP LUN Configuration and Security Manager User Guide 107