HP StorageWorks XP Remote Web Console Software User Manual
Page 213
NOTE:
If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group
that consists of one or more virtual volumes (V-VOLs).
• No.: CVS volume's setting number.
• Emulation: CVS volume's emulation type.
• Capacity: CVS volume's capacity displayed in the capacity unit selected from the Capacity
Unit list on the Make Volume pane (1).
• CU:LDEV: CU and LDEV numbers for the CVS volume to be created. The default is blank.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL).
For more information about virtual volumes, see the
HP StorageWorks Snapshot XP user guide.
•
Select LDEV No. area: Used to set LDEV numbers for the CVS volumes you are creating.
• Select CU No.: CU number. The default is CU 00. The settings of LDEV numbers for the selected
CU number appear in the Select LDEV No. table.
• Interval: When you select more than one volume, used to set the interval between the LDEV
numbers that need to be assigned to the newly created volumes. The default value is 0. When
you select 0, consecutive LDEV numbers are assigned.
NOTE:
The value you specify as the interval between LDEV numbers counts only available LDEV
numbers and skips those that are not selectable.
• Select LDEV No. table: Displays the settings of LDEV numbers for the CU number selected from
the Select CU No. list. Gray indicates the LDEV numbers that are not selectable, white indicates
unused LDEV numbers, and blue indicates available LDEV numbers. You can select an LDEV
number from the white LDEV numbers in the table. When you set the LDEV number, that LDEV
number becomes available and changes to blue.
NOTE:
LDEV numbers that are not selectable may be already in use or already assigned to another
emulation group (grouped by 32 LDEV numbers) (see
).
XP LUN Configuration and Security Manager User Guide
213