HP StorageWorks XP Remote Web Console Software - Manual (Page 184)

Set LUSE Confirmation pane
When you right-click the free LDEVs you want to form the LUSE volume in the LDEV Information table,
and select Set LUSE Volume, the Set LUSE Confirmation pane appears. You can verify that the LDEVs
listed in the confirmation pane are the ones you want to create a LUSE volume.
Figure 86 Set LUSE Confirmation pane
.
• LUSE components list
Displays information about LDEVs that constitute the LUSE volume.
• LDEV: LDEV icon, CU number, and LDEV number.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
NOTE:
If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume (V-VOL).
For more information about V-VOLs, see the
HP StorageWorks Snapshot XP user guide.
• Emulation: LDEV's emulation type.
• Capacity: LDEV's capacity.
• OK: Creates the LUSE volume and sets the LUSE volume configuration to have LDEVs in the LUSE
components list. LDEVs registered as components of the LUSE volume appear in blue bold italics
in the LDEV Information table.
• Cancel: Cancels the operation to create a LUSE volume using LDEVs in the list.
Volume Manager operations 184