HP StorageWorks XP Remote Web Console Software - Manual (Page 205)

NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
Table 37 Emulation groups
D-type (overseas PCM) emulation type Emulation group
3390-3, 3390-3A, 3390-3B, 3390-3C, 3390-9,
3390-9A, 3390-9B, 3390-9C, 3390-L, 3390-LA,
3390-LB, 3390-LC, 3390-M, 3390-MA, 3390-
MB, 3390-MC
Group 1
3390-3R Group 2
OPEN-3, OPEN-8, OPEN-9, OPEN-E Group 4
OPEN-V Group 6
• CU number of another SLPR is used: When selected, you can select the number of an LDEV that
does not exist in the SLPR to which the parity group does not belong. When cleared, you can only
select the number of the LDEV in the SLPR to which the parity group belongs.
NOTE:
The CU number of another SLPR is used check box appears only when you log in as a storage
administrator and when there are two or more SLPRs.
• Back: Returns to Install CV pane (1).
• Next: Opens one of the following panes:
• If the selected LDEV number's boundary area does not have an SSID, the Install CV pane (3)
for setting an SSID appears.
• If the selected LDEV's boundary area has an SSID, the Install CV pane (4) appears.
• Cancel: Cancels the LDEV's settings, and returns to the Customized Volume pane.
• Clear: Removes a CU:LDEV number that is already assigned. To remove a CU:LDEV number, right-
click the CVS volume number corresponding to the CU:LDEV number you want to remove, and
select Clear.
Install CV pane (3)
This pane appears when you create CVS volumes if the selected LDEV number's boundary area does
not have an SSID. You can set an SSID on the Install CV pane (3).
XP LUN Configuration and Security Manager User Guide 205