HP StorageWorks XP Remote Web Console Software User Manual
Page 90
Do you need to turn on
or off the power supply
of the host?
When to select this op-
tion
Host mode option
No.
No
When one of the follow-
ing operating systems is
installed on the hosts, and
the hosts are to access
LUs larger than 2 TB:
•
AIX 5.2 TL08 or later
•
AIX 5.3 TL04 or later
•
Windows Server
2003 SP1 or later
•
Red Hat Enterprise
Linux AS 4 Update 1
or later
CAUTION:
Other operating systems
do not support LUs
larger than 2 TB. If
other operating systems
are used by hosts, make
sure that LUs are not
larger than 2 TB.
For information about
the maximum LU
capacity supported by
your operating system,
contact HP technical
support.
2TB or Larger LUN Sup-
port
24
No
Apply this when iSCSI is
used
iSCSI Delayed ACK im-
provement
27
NOTE:
You do not need to turn on or off the power supply for the storage system when you change host
mode options.
Creating iSCSI targets when configuring iSCSI environments
You can connect multiple server hosts on different platforms to one port on the array. When configuring
the system, you must group server hosts connected to the array by iSCSI targets. For example, if HP-UX
and Windows hosts are connected to a port, you must create one iSCSI target for HP-UX hosts and
another iSCSI target for Windows hosts. Next, you must register HP-UX hosts to the corresponding
iSCSI target and register Windows hosts to the other iSCSI target.
The following procedure describes how to create iSCSI targets. The procedure for registering hosts
to an iSCSI target is described in
Registering hosts in host groups
.
1.
Start XP LUN Configuration and Security Manager Software. The XP LUN Configuration and
Security Manager Software pane (
) appears.
XP LUN Configuration and Security Manager Software operations
90