Disabling xp secure manager, Disabling lun security – HP StorageWorks XP Remote Web Console Software User Manual
Page 117
1.
Start XP LUN Configuration and Security Manager Software. The XP LUN Configuration and
Security Manager Software pane (
or
) appears.
2.
In the tree, locate the port.
3.
See the text on the right of the port name to find the XP Secure Manager status.
• If XP Secure Manager is enabled, you do not need to perform the remaining steps.
• If XP Secure Manager is disabled, go to step 4.
4.
Right-click the port, and select XP Secure Manager: Disable->Enable. A confirmation message
appears.
5.
Click Yes. A key is added to the port icon.
6.
Click Apply. A confirmation message appears.
7.
Click OK. Changes in the security settings are applied to the array.
Disabling XP Secure Manager
CAUTION:
Do not disable XP Secure Manager on ports when host I/O is in progress.
1.
Start XP LUN Configuration and Security Manager Software. The XP LUN Configuration and
Security Manager Software pane (
or
) appears.
2.
In the tree, locate the port.
3.
See the text to the right of the port name to find the XP Secure Manager status.
• If XP Secure Manager is disabled, you do not need to perform the remaining steps.
• If XP Secure Manager is enabled, go to step 4.
4.
Right-click the port, and select XP Secure Manager: Enable -> Disable. A confirmation message
appears.
5.
Click YES. The key is removed from the port icon.
6.
Click Apply. A confirmation message appears.
7.
Click OK. Changes in the security settings are applied to the array.
NOTE:
If XP Secure Manager is disabled on a port, host groups corresponding to that port are grayed out
in the tree (except for host group 0).
Configuring arrays for using RAID Manager XP commands
The system administrator can enter RAID Manager XP commands from open-system hosts to perform
Continuous Access XP and Business Copy XP operations on logical devices. For example, use RAID
Manager XP commands to create and split pairs. To enable the system administrator to enter RAID
Manager XP commands from open-system hosts, you must specify at least one logical device as the
command device. If desired, you must also apply command device security to other logical devices
in the array.
XP LUN Configuration and Security Manager User Guide
117