HP StorageWorks XP Remote Web Console Software - Manual (Page 191)

5. Click Set.
A pane appears. If the displayed pane asks if you want to perform a Volume Manager operation
on a volume that has a path definition (see
Figure 85 ), follow step 5a. If the displayed pane asks
if you want to perform an Volume Manager operation that affects more than one SLPR or CLPR,
follow step 5b. If the Set LUSE Confirmation pane appears, follow step 5c.
a. To perform a Volume Manager operation on a volume that has a path definition (see Figure
85 ), click OK. If a message appears asking whether you want to perform a Volume Manager
operation that affects more than one SLPR or CLPR, go to step 5b. If such a message does
not appear, go to step 6.
If you do not want to perform a Volume Manager operation on a volume that has a path
definition, click Cancel. The previous pane appears, and you can retry the operation.
b. To perform a Volume Manager operation that affects more than one SLPR or CLPR, click OK.
A confirmation pane appears. Go to step 6.
If you do not want to perform a Volume Manager operation that affects more than one SLPR
or CLPR, click Cancel. The previous pane appears, and you can retry the operation.
c. If the Set LUSE Confirmation pane appears, go to step 6.
6. Click OK (or Cancel).
NOTE:
New settings appear on the pane in blue bold italics are not yet registered to the array.
You cannot reset LUSE volumes that have been created but not yet registered to the array
(those in blue bold italics) to the state they were in before they were created (see
Resetting
unregistered LUSE volumes ).
7. Click Apply (or Cancel).
8. Click OK.
Creating LUSE volumes using the LDEV information table
1. In the Volume Manager pane, select a CU number in the LDEV Information tree. The LDEV
Information table displays all LDEVs in the selected CU.
XP LUN Configuration and Security Manager User Guide 191