HP StorageWorks XP Remote Web Console Software User Manual
Page 231
CAUTION:
An error message might appear if a Volume Initialize and Make Volume operation are performed
concurrently. For this error message, the part code is 0003 and the error number is 1041. If this
message appears, ensure that these operations are performed separately.
1.
On the upper right of the XP Remote Web Console main pane, select a CU group from the
drop-down list.
2.
From the Customized Volume pane, select the LDEV folder on the Parity Group - LDEV tree to
display a list of VDEVs, and select a VDEV. The LDEV Information table displays detailed
information about the LDEVs.
NOTE:
If the selected VDEV contains one or more CVs that violate any restriction for the Volume
Initialize operations (see
), you cannot perform Volume Initialize
operations. Remove all invalid CVs before performing Volume Initialize operation.
3.
Right-click any part of the Parity Group - LDEV tree, and select Volume Initialize. The Volume
Initialize pane (1) appears.
4.
On the Volume Initialize pane (1):
a.
Select one or more CVS volume numbers.
b.
In the Select CU No. list, select a CU number.
c.
In the Select LDEV Number table, select an LDEV number from the white LDEV numbers. The
CU and LDEV number appear in the CU:LDEV field.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For
more information about external LUs, see the
HP StorageWorks External Storage XP
user guide.
d.
To change a CU:LDEV number that is already assigned, select one or more volume numbers
corresponding to the CU:LDEV numbers you want to remove, right-click, and select Clear.
5.
After setting all CU and LDEV numbers, click Next.
If the selected LDEV number's boundary area does not have an SSID, the SSID setting pane
appears. Go to step 8. If the selected LDEV number's boundary area has an SSID, go to step
10.
6.
On the SSID setting pane, select the CU number.
7.
In the Input SSID list, select a new SSID.
NOTE:
When you log in as a storage administrator and the SSID number of another SLPR is used
check box is selected, you can also enter an SSID in the Input SSID list.
8.
Click Set. The SSID appears in the SSID field of the SSID setting area.
XP LUN Configuration and Security Manager User Guide
231