Deleting data volumes from a mirror (pairsplit-s – HP StorageWorks XP Remote Web Console Software User Manual
Page 174
1.
Ensure that the Remote Web Console main window is in Modify mode.
For detailed information about how to do this, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
2.
Ensure that the Journal Operation window is open (see
).
3.
Do one of the following:
•
In the tree, select a master journal group or a restore journal group under Registered.
•
In the tree, select Journal Groups or Registered, and then select a master journal group
from the list to the right.
A list of mirrors appears. One row in the list represents one mirror.
4.
Locate mirrors that are in Stop, Hold, Holding, or Hold(Failure) status.
5.
From the mirrors, select and right-click the mirror(s) that you want to restore.
The result of this operation differs according to the status of the selected mirror.
•
When you select the mirror in Stop status, the copying of data is restarted after the
recovery.
•
When you select the mirror in Hold or Holding status, the delta resync operation is
performed after the recovery.
•
When you select the mirror in Hold(Failure) or Holding status, the status changes to Hold
after the recovery.
6.
Select JNL Groups and Pairresync.
7.
See the Preview list to check the mirrors that you want to restore.
•
To cancel restoring a mirror, select and right-click the mirror, and then click Cancel.
•
If necessary, you can repeat steps
to
to specify other mirrors.
8.
Click Apply to restore the mirror(s). If an error occurs, the error code appears in the right
column of the Preview list. To view detailed information about the error, right-click the error
code and select Error Detail.
Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
A mirror is a combination of a master journal group and a restore journal group. If you delete
data volumes from a mirror, the copying of data from the master journal group to the restore journal
group ends.
When one journal group uses two mirror IDs, the result of the operation differs according to the
status of the specified mirror:
•
When you specify a mirror in Hold, Holding, or Hold(Failure) status, only the XP Continuous
Access Journal pair of the specified mirror is deleted.
•
When you specify a mirror that is not in Hold, Holding, or Hold(Failure) status, the XP
Continuous Access Journal pairs of both mirrors (including the mirror that you do not specify)
will be deleted.
To delete data volumes from a mirror, follow the procedure described in this section. The primary
storage system administrator and the secondary storage system administrator can perform this
operation.
1.
Ensure that the Remote Web Console main window is in Modify mode.
For detailed information about how to do this, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
2.
Ensure that the Journal Operation window is open (see
).
174
Using Journal Groups