HP StorageWorks XP Remote Web Console Software User Manual
Page 227
Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code
(SSB2)
Error Code
(SSB1)
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified secondary
storage system did not support the external volume.
8F67
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
a command device.
8F6D
The XP Continuous Access Journal pair cannot be created because the
P-VOL is being used for XP Snapshot.
8FEC
The information for the consistency group cannot be retrieved because
XP Continuous Access Journal was not installed.
B992
The source of command device has run out. Set the command device to
OFF and to ON again from the LUN Manager.
B9C0
XP Continuous Access Journal Paircreate cannot be performed because
the specified device is a command device.
B901
B9E1
XP Continuous Access Journal Pair could not be deleted because the mirror
ID was invalid.
B901
B9E2
XP Continuous Access Journal Paircreate cannot be performed because
the mirror ID is invalid.
B902
/B901/
/B9E0/
The command was rejected because the volume status was SMPL.
B907
/B9E1/
/B9E2/
The S-VOL hide mode is not supported.
B90A
/D004/
XP Continuous Access Journal Paircreate cannot be performed because
the XP Continuous Access Journal program product is not installed.
B90D
/B9E4/
XP Continuous Access Journal pair cannot be suspended because the
mirror ID is invalid.
B909
A status of unavailable occurred because the XP Continuous Access Journal
pair was acquired during the power-on. Retry the operation.
B900
The command was rejected because the XP Continuous Access Journal
configuration was changed. Check the status of the XP Continuous Access
Journal pair.
B94B
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the consistency group
number is wrong.
B90B
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the path is not set between
the storage systems.
B90E
A request of XP Continuous Access Journal Paircreate on the XP Continuous
Access Journal intermediate volume was received. However, the command
B90F
was rejected because either Hitachi Universal Replicator for Mainframe
or Hitachi TrueCopy for Mainframe was not installed.
The settings of the journal group option could not be updated.
B910
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because the system
configuration does not allow these operations.
B913
The command was rejected because no journal group was registered.
B912/B9F8
A request of XP Continuous Access Journal pair status transition was
received. However, the command was rejected because the status for the
DB02
request could not be transited. (for example, Status transition other than
Troubleshooting When Using RAID Manager 227