HP StorageWorks XP Remote Web Console Software - Manual (Page 140)

Table 32 Operations Displayed in the History Window (continued)
Descriptions Displays
An operation for releasing a pair has been started at the
secondary storage system. The status of the data volume
pair will change from COPY to SMPL. Status Change by RCU (COPY to SMPL; Pairsplit-S Start)
An operation for releasing a pair has been started at the
secondary storage system. The status of the data volume
pair will change from PAIR to SMPL. Status Change by RCU (PAIR to SMPL; Pairsplit-S Start)
The status of the data volume pair was changed because
an operation for releasing a pair finished at the secondary
storage system. Status Change by RCU (Pairsplit-S Complete)
A data volume pair became ready for delta resync. Ready for Delta resync
A failure occurred with the data volume pair that was ready
for delta resync. Ready for Delta resync (Failure)
The status of the primary data volume was changed to
HOLD because of a delta resync operation. Status Change for Delta resync
The status of the data volume pair was changed from SMPL
to HOLD because of an operation from the primary storage
system. Status Change by MCU (SMPL to HOLD)
The status of the data volume pair was changed from HOLD
to PAIR because of an operation from the primary storage
system. Status Change by MCU (HOLD to PAIR)
The status of the data volume pair was changed from HOLD
to COPY because of an operation from the primary storage
system. Status Change by MCU (HOLD to COPY)
The status of the data volume pair was changed from HOLD
to SMPL because of an operation from the primary storage
system. Status Change by MCU (HOLD to SMPL)
An operation for releasing a pair has been started at the
secondary storage system. The status of the data volume
pair will change from HOLD to SMPL. Status Change by RCU (HOLD to SMPL; Pairsplit-S Start)
The status of the secondary data volume was changed to
HOLD because of a delta resync operation. Status Change to HOLD
The storage system could not identify the operation. Unknown
Notes:
•
The history information (that is, rows in the list) might not appear in chronological descending
order. To sort the information in descending (or ascending) order, click a heading.
•
The History window can show history information for up to 524,288 operations. However,
the window can only show up to 16,384 operations at one time. To view the remaining
operations, click the Previous or Next button.
•
The History window does not provide history information older than seven days. Also, if the
number of operations exceeds 524,288, the oldest operations are deleted in chronological
order to keep the number at 524,288, even if the operations occurred within the last seven
days. The history file always contains the most recent operations, up to a maximum of 524,288
operations. The history information for an entire week may not always be available.
•
If a failure occurs with two or more data volume pairs at the same time, the number of pairs
showing Pairsplit-r(Failure) or Ready for Delta resync(Failure) may not match the actual number
of pairs where the failure occurs.
140 Using the XP Continuous Access Journal GUI