HP StorageWorks XP Remote Web Console Software - Manual (Page 179)

•
Set: Applies the settings in the Display Filter window to the list.
•
Cancel: Discards the settings and closes the window.
Saving Pair Status Information to a Text File
The export function of XP Continuous Access Journal enables you to save pair status information
to a text file. An example of the text file is shown in
“Example of an Exported Text File” (page 179) .
You can use the export function only while the client file access is enabled. When the client file
access is not enabled, the Export button is not available on the Pair Operation window. For further
information about the client file access settings, see the HP StorageWorks XP24000/XP20000
Remote Web Console User Guide.
Example 1 Example of an Exported Text File
<Pair Status at 30/04/2005 12:34:56>
Port Gr(Name) LUN Vol Status JNG Mr S/N(LDKC) CNTL Port Gr LUN Vol JNG Type
CTG ErrLv Sync CLPR CopyTime
CL3-A 00(3A-G00 ) 100 00:08:00 PAIR 01 02 11111(00) 05 CLA-R FF 7EE 00:3F:FF F6 P-VOL
09 Group 100 00:CLPR0 001:00:00
CL3-A 00(3A-G00 ) 101 00:08:01 SMPL
01:CLPR1
CL3-A 00(3A-G00 ) 102 00:08:02 PSUS 10 02 11111(00) 05 CL1-E FF 7EE 00:3F:F6 ED P-VOL
12 LU 80 02:CLPR2
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)
(16) (17) (18) (19) (20)
(11) Group number of host group in the remote
storage system (1) Port in the local storage system
(12) LU number in the remote storage system (2) Group number and name of host group or iSCSI
target in the local storage system. (The name is
limited to a maximum of 16 characters.)
(13) LDKC number, CU number, and LDEV number
in the remote storage system (3) LU number in the local storage system
(14) Journal group number in the remote storage
system (4) LDKC number, CU number, and LDEV number
in the local storage system
(15) Type of volumes in the local storage system (5) Status of the pair
(16) Consistency group number (6) Journal group number in the local storage system
(17) Error level (7) Mirror ID
(18) Progress of copy operation. Or,
synchronization rate (that is, concordance rate)
between the data volume before the pair was split
and the data volume after the pair was split. (8) Serial number of the remote storage system
(19) CLPR number and CLPR name (9) Controller ID and model name of the remote
storage system
(20) Copy time (10) Port number in the remote storage system
Notes:
•
A device ID ending in # (for example, 00:00:3C #) indicates the LDEV is an external volume.
For detailed information about external volumes, see the HP StorageWorks XP24000/XP20000
External Storage Software User Guide.
•
A device ID ending in X (for example, 00:00:3C X) indicates the LDEV is an XP Thin
Provisioning virtual volume. For detailed information about virtual volumes, see the HP
StorageWorks XP24000/XP20000 Thin Provisioning Software User Guide.
Reviewing the Pair Operation Window 179