HP StorageWorks XP Remote Web Console Software User Manual
Page 228
Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code
(SSB2)
Error Code
(SSB1)
SMPL when the Paircreate was requested, or other than PSUS when the
Pairresync was requested.)
A request of XP Continuous Access Journal Pair status transition was
received. However, the command was rejected because the pair was in
the state of Suspending or Deleting.
DB03
XP Continuous Access Journal pair status cannot be transited during the
power-on processing.
DB07
XP Continuous Access Journal pair status cannot be transited during the
power-off processing.
DB08
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
used in a pair on the XP Continuous Access Asynchronous.
DB09
A request of XP Continuous Access Journal Pairresync (journal resync
mode) was received. However, the command was rejected because the
specification was volume instead of group.
DB0C
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the CLPR number of the
specified volume differed from the CLPR number of the journal group.
E843
A request from XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volumes
E846
belong to the journal group that is contained in the XP Continuous Access
Journal and XP Continuous Access combination (2DC) configuration in
the intermediate site.
An operation request for the journal group, which was used in the system
that consists of a single primary and secondary storage system, was
E847
received. However, the command was rejected because the specified
volume is defined to be used in the system that consists of multiple primary
and secondary storage systems.
An operation request for the journal group, which was used in the system
that consists of multiple primary and secondary storage systems, was
E848
received. However, the command was rejected because the specified
volume is defined to be used in the system that consists of a single primary
and secondary storage system.
The specified consistency group number is already used.
E866
Because the shared memory is not mounted in the specified LDEV number,
it cannot be used as a data volume.
E86E
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the path between the
E871
storage devices for the two way was not defined. Check whether the
bidirectional normal path was defined or not.
A request of XP Continuous Access Journal Paircreate was received.
However, the pair could not be created because the serial number of the
secondary storage system that was specified was incorrect.
E876
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the emulation type was
E878
mixed with the volume of 3390-9A and the volume of 3390-9A in the
specified journal group.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
E879
different from the LDKC of the specified journal group. A pair in the same
journal group cannot be set across two LDKCs.
228 Troubleshooting