HP StorageWorks XP Remote Web Console Software - Manual (Page 133)

Description Item
The icon indicates the status of logical paths between the
local storage system and the remote storage system:
•
All logical paths are in normal status.
•
A failure occurred at some of the logical paths.
Shows information about the selected remote storage
system: Operation List
•
Controller ID: The controller ID and the model name of
the storage system of a remote storage system. The
controller ID for an XP24000/XP20000 Disk Array is
5. The model name of an XP24000/XP20000 Disk
Array is XP24000/XP20000 Disk Array.
The icon indicates the status of logical paths between
the local storage system and the remote storage system:
◦ All logical paths are in normal status.
◦ A failure occurred at some of the logical paths.
• S/N (LDKC): The five-digit serial number and the LDKC
number of the remote storage system. When the remote
storage system is an XP12000/XP10000 Disk Array
or USP V/VM, 00 appears as the LDKC number.
• Path Gr. ID: The path group ID. All path group IDs show
as Default.
Note: In the current version, the path group ID is set to
the default value.
•
M-R Path: The channel type of the logical paths between
the local storage system and the remote storage system.
This column always shows Fiber.
• Status: Indicates whether logical paths fail.
Normal: No failure occurs to the logical paths.
Failed: All the logical paths fail.
Warning: Some of the logical paths fail.
• Num of Path: The number of logical paths.
Viewing Information about Logical Paths
Logical paths are communications paths that connect the local storage system ports and the remote
storage system ports.
To view information in the DKC Operation window about logical paths:
1. In the Display box, select DKC.
2. Select a remote storage system from the tree.
The list shows logical paths. Each row in the list indicates one logical path ( Figure 61 (page
133) ).
Figure 61 Logical Path Information in the DKC Operation Window
DKC Operation Window 133