HP StorageWorks XP Remote Web Console Software - Manual (Page 53)

Figure 10 Direct Remote Copy Connections
* To set ports, use LUN Manager and set the port topology to Fabric off, FC-AL.
Figure 11 Switch Remote Copy Connections
Figure 12 Extender Remote Copy Connections
Caution: When an MCU and RCU are connected via switches with a channel extender, and multiple
remote copy paths are assembled, the capacity of the data to be transmitted may concentrate on
particular switches, depending on the configuration and the settings of the switch routing.
Configuring the Primary and Secondary Storage Systems for XP Continuous
Access Journal Operations
After you have installed the XP Continuous Access Journal hardware and software, you can configure
the primary storage systems and secondary storage systems for XP Continuous Access Journal
operations.
To configure the primary storage systems and secondary storage systems for XP Continuous Access
Journal operations:
Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations 53