HP StorageWorks XP Remote Web Console Software - Manual (Page 225)

Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code
(SSB2)
Error Code
(SSB1)
Paircreate or Pairresync is not available, because the specified
journal group is dedicated to the Continuous Access Journal combination
(2DC), and the MU# is 0.
8C13
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume is an
external volume. 8F00
The XP Continuous Access Journal pair cannot be created because the
specified volume is a member of a pair of either one of the following two
programs: 8F10
•
XP Business Copy
• XP FlashCopy
The XP Continuous Access Journal pair cannot be created. The processing
of volume migration could not be stopped because the P-VOL is being
migrated by XP Auto LUN. 8F11
The XP Continuous Access pair cannot be created because the specified
volume is the reserved volume. 8F14
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume is in
the state of online from the host. 8F17
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume is
used in a pair of another program. 8F18
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the emulation type of the
specified volume is unusable. 8F19
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified P-VOL is not
in the SMPL status. 8F1B
A request of XP Continuous Access Journal Pairresync was received.
However, the command was rejected because the specified P-VOL was
not in the PSUS status. 8F1C
The XP Continuous Access Journal pair cannot be created because the
cache or shared memory was being restored. 8F1E
The XP Continuous Access Journal pair cannot be created because the
cache or shared memory was being blocked. 8F1F
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because of one of the
following reasons: 8F21
•
The specified volume was the P-VOL of the XP Continuous Access.
• The unavailable configuration with the combination of the XP Business
Copy (including when the mirror ID of the XP Continuous Access Journal
was 0).
•
Unavailable configuration of the status transition.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because a path between the devices
was not created. 8F24
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because PIN existed in
the specified volume. 8F25
Troubleshooting When Using RAID Manager 225