HP StorageWorks XP Remote Web Console Software - Manual (Page 71)

Continuous Access XP Journal user guide 71
Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations) ” on
page 72.
Figure 30 Recovering from primary site disasters
Changing to 3DC multi-target configurations after recovering from primary site failures
If you follow the instructions in ” Recovering from primary site failures ” on page 70 and the system does
not change to a 3DC cascading configuration, you can change the system to a 3DC multi-target
configuration after removing failures from the primary site and other locations. In the resulting 3DC
multi-target configuration, the former Continuous Access XP secondary volume is the primary volume.
To change the system to a 3DC multi-target configuration:
1. Use RAID Manager XP to delete the former Continuous Access XP Journal pair.