Volume initialize pane (2), Table 41 set ssid tree icons (volume initialize), 105 volume initialize pane (2) for setting ssids – HP StorageWorks XP Remote Web Console Software User Manual
Page 175: 41 set ssid tree icons (volume initialize)
LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 175
Volume Initialize pane (2)
This pane appears during the initialization of CVS volumes if the selected LDEV number’s boundary area
does not have an SSID. You can set an SSID on the Volume Initialize pane (2).
Figure 105
Volume Initialize pane (2) for setting SSIDs
This pane has the following features:
•
Set SSID tree: Displays a hierarchical structure of SSID setting information containing CU numbers (for
example, CU 00), SSID boundary areas (for example, 00-3F), and SSID (for example, 0004). When a
selected LDEV number’s SSID boundary area has no SSID, the following icon appears before the
related CU number and LDEV boundary area. The SSID of a boundary area having no SSID is ----.
•
Set SSID table: Used to set the SSID boundary area.
• CU: CU number containing an LDEV boundary with no SSID.
• LDEV Boundary: Boundary area of an LDEV number with no SSID.
• SSID: Specified SSID. The default is blank.
•
Input SSID: Used to select or enter the SSID. You can enter the SSID only when you log in as a storage
administrator.
•
SSID number of another SLPR is used: When selected, you can select the number of an SSID that does
not exist in the SLPR to which the parity group does not belong. When cleared, you can select only the
number of the SSID in the SLPR to which the parity group belongs.
NOTE:
The SSID number of another SLPR is used check box appears only when you log in as a
storage administrator and when there are two or more SLPRs.
Table 41
Set SSID tree icons (Volume Initialize)
Icon
Description
CU number is not extracted.
CU number is extracted.
LDEV boundary area.