HP XP LUN Configuration and Security Manager Software - Manual (Page 15)

LUN Configuration and Security Manager XP user guide for the XP10000/XP12000 15
LUN Security
To protect data from unauthorized access, apply security policies to LUNs. LUN Manager can apply LUN
security to ports to safeguard LUs. If a port has the External attribute, you cannot apply LUN security to the
port.
If LUN security is applied, it limits which host can access which LUs. A host can only access LUs associated
with its host group. Hosts cannot access LUs associated with other host groups.
05 OpenVMS
06 Reserve
07 Tru64
08 HP-UX or Windows 2
09 Solaris ®
0A NetWare
0B Reserve
0C Windows 3, 4
0D, 0E Reserve
0F AIX ®
10 - 19 Reserve
1A - 1F Reserve
20 - 29 Reserve
2A, 2B Reserve
2C Windows Extension 3, 4
2D - 2F Reserve
29 Solaris 5
1. For Windows with any FC HBAs when MSCS is not needed.
2. For Windows with D8602 FC HBAs with or without MSCS.
3. For Windows with Emulex or QLogic FC HBAs with or without MSCS.
4. If you register Windows server hosts in a host group, verify that the host mode of the host group is 0C:
Windows or 2C: Windows Extension. If you are thinking about creating LUSE volumes, such as
expanded LUs, consider setting the host mode 2C: Windows Extension to the host group. If the host
mode is 0C: Windows and an LU path is defined for a volume, you cannot execute LUSE operations
on the volume without unmapping the volume first.
5. When registering Sun Cluster server hosts in the host group (Use this host mode both VERITAS Cluster
Server and Sun Cluster are used).
Table 3 Host modes for host operating systems (continued)
Host mode Host operating system