HP XP LUN Configuration and Security Manager Software - Manual (Page 61)

LUN Configuration and Security Manager XP user guide for the XP10000/XP12000 61
Use this pane to assign the CU and LDEV numbers of a custom volume to be created. The top area is
the CV setting information area and shows detailed information about the custom volumes to be
created. The bottom area is the LDEV number setting area and is used to set the CU and LDEV numbers
for the custom volume to be created.
6. In the CV setting information area, select one or more custom volumes.
7. In the Select CU No. list, select a CU number. The LDEV number setting area is updated to reflect the
selected CU number.
8. If you selected multiple custom volumes, select an interval from the Interval list. This value specifies the
interval between the LDEV numbers that need to be assigned to the new volumes. The default value is
0. When you select 0, consecutive LDEV numbers are assigned. The value you specify as the interval
between LDEV numbers counts only the available LDEV numbers.
9. In the LDEV number setting area, select an LDEV number by clicking the appropriate white box. For
example, to select an LDEV number of 96, click the +90/+6 box as shown in Figure 28 .
NOTE: The CU number of another SLPR is used check box is displayed only when you logged in
as a user in the StorageAdmin group with full array access and when there are two or more SLPRs.
When the CU number of another SLPR is used check box is selected, you can select the number of
an LDEV that does not exist in an SLPR to which the priority group does not belong. When the check
box is cleared, you can only select the number of an LDEV in the SLPR to which the parity group
belongs.
Figure 28 Select an LDEV number
The CU:LDEV number in the CV setting information area is updated.
NOTE: If you specify an LDEV number in the selected CU, free sequential LDEV numbers in LUSE
configuration are automatically assigned. You cannot specify an LDEV number, if free LDEV
numbers in LUSE configuration are not available in either of the following CUs:
• The CU displayed in the Select CU No. list.
• A CU whose CU number is larger than the CU number displayed in the Select CU No. list.