HP StorageWorks XP Remote Web Console Software - Manual (Page 30)

30 Overview of LUN Manager
NOTE:
•
Sometimes Standard, High Speed, and Initiator/External MIX modes are collectively referred to as
Fibre PCB modes. PCB is an acronym for printed circuit board. The array documentation sometimes
uses the term PCB when referring to a channel adapter, which is a printed circuit board used for
connecting hosts and an array.
• Storage partition administrators cannot apply High Speed or Initiator/External MIX mode.
Table 3 Port serial numbers and names (4-port channel adapters)
Port serial
number
Standard
mode 1
High Speed or
Initiator/External
MIX mode 1
Port serial
number
Standard
mode 1
High Speed or
Initiator/External
MIX mode 1
0 CL1-A CL1-A 128 CL2-A CL2-A
1 CL3-A CL3-A [1-A 2nd] 129 CL4-A CL4-A [2-A 2nd]
2 – – 130 – –
3 – – 131 – –
4 – – 132 – –
5 – – 133 – –
6 – – 134 – –
7 – – 135 – –
8 CL1-C CL1-C 136 CL2-C CL2-C
9 CL3-C CL3-C [1-C 2nd] 137 CL4-C CL4-C [2-C 2nd]
10 – – 138 – –
11 – – 139 – –
12 – – 140 – –
13 – – 141 – –
14 – – 142 – –
15 – – 143 – –
16 CL1-E CL1-E 144 CL2-E CL2-E
17 CL3-E CL3-E [1-E 2nd] 145 CL4-E CL4-E [2-E 2nd]
18 – – 146 – –
19 – – 147 – –
20 – – 148 – –
21 – – 149 – –
22 – – 150 – –
23 – – 151 – –
24 CL1-G CL1-G 152 CL2-G CL2-G
25 CL3-G CL3-G [1-G 2nd] 153 CL4-G CL4-G [2-G 2nd]
26 – – 154 – –
27 – – 155 – –
28 – – 156 – –
29 – – 157 – –