HP StorageWorks XP Remote Web Console Software - Manual (Page 117)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 117
For more information about authentication of hosts, see ” User authentication (iSCSI environments) ” on
page 48.
Operating NAS channel adapters
You can use LUN Manager to check the running status of OSs on NAS channel adapters. Also, when a
failure occurs on the OS, you can operate (restart, stop, or start) the OS using LUN Manager without
going to the array’s cabinet.
NOTE: You cannot perform operations related to NAS channel adapters and set Fibre Channel ports at
the same time. Therefore, if you change a Fibre Channel port setting first in the Port pane, you cannot
operate the NAS channel adapter. Click Apply once to apply the change to the array, and then operate
the NAS channel adapter’s OS.
Restarting a NAS channel adapter’s OS
1. Start LUN Manager, and display the Port pane ( Figure 23 ).
2. In the Package tree, select the NAS folder or a NAS channel adapter.
• If you select the NAS folder, the CHN list displays the NAS channel adapters in the array.
• If you select a channel adapter, the CHN list displays information about that channel adapter.
3. In the CHN list, select the channel adapter whose OS Status column contains UP. The Reboot and Shut
Down buttons are activated.
4. Click Reboot. A confirmation message appears.
5. Click OK. The row selected in the CHN list appears in blue and the operation (Reboot) appears in the
Setting column. Also, the channel adapter name to be operated appears in blue in the Package tree.
6. Click Apply. A confirmation message appears.
7. Click OK. The selected NAS channel adapter’s OS restarts.
When the reboot starts, BUSY (Shutdown) appears in the OS Status column. If the OS restarted, UP
appears.
NOTE: You can stop the OS by right-clicking the channel adapter in the Package list and selecting
Reboot instead of using the Reboot button.
Stopping a NAS channel adapter’s OS
1. Start LUN Manager, and display the Port pane ( Figure 23 ).
2. In the Package tree, select the NAS folder or a NAS channel adapter.
• If you select the NAS folder, the CHN list displays the NAS channel adapters in the array.
• If you select a channel adapter, the CHN list displays information about that channel adapter.
3. In the CHN list, select the channel adapter whose OS Status column contains UP. The Reboot and Shut
Down buttons are activated.
4. Click Shut Down. A confirmation message appears.
5. Click OK. The row selected in the CHN list appears in blue and the operation (Shut Down) appears in
the Setting column. Also, the channel adapter name to be stopped appears in blue in the Package
tree.
6. Click Apply. A confirmation message appears.
7. Click OK. The selected NAS channel adapter’s OS stops.
During stop processing, BUSY (Shutdown) appears in OS Status column. If the OS stops, DOWN
appears.