HP XP External Storage Software - Manual (Page 63)

Port Operation Tree
The Port Operation tree, on the left side of the Port Operation window, contains the following:
Description Item
Changes the items displayed in the Port Operation tree.
You can select Fibre as a PCB type. List
The ports in the local storage system appear in the tree.
The information displayed in the list on the right changes
corresponding to the items clicked in this tree. For instance,
when you click External in the tree, only the ports that port
attributes are set to external are displayed in the Port
Operation list.
•
Subsystem: Nothing appears in the list when you select
Subsystem. Subsystem is selected, when you display
the Port Operation window.
•
External: When you click External, the ports set to the
external port are displayed in the list. The external port
is the port attribute used for XP External Storage. The
external port does not have the High Speed mode.
• Target: When you click Target, the ports set as the target
port are displayed in the list.
•
Initiator: When you click Initiator, the ports set as the
initiator port (used for XP Continuous Access, TrueCopy
for Mainframe, XP Continuous Access Journal, Universal
Replicator for Mainframe, and so on) are displayed in
the list.
•
RCU Target: When you click RCU Target, the ports set
as the RCU target port (used for XP Continuous Access,
TrueCopy for Mainframe, XP Continuous Access Journal,
Universal Replicator for Mainframe, and so on) are
displayed in the list.
•
Initiator/External: When you click Initiator/External,
the ports for which the Initiator/External MIX mode is
set are displayed in the list.
Tree
Port Information List
When you click the items in the Port Operation tree, the following information about the port in
the local storage system appears in the list on the right.
Description Item
Port number. One of the following icons appears on the
left of each port:
•
: Ports in the Standard mode.
•
: Ports in the High Speed mode.
• : Ports in the Initiator/External MIX mode.
Port
Port attribute. The external ports are used for connecting
to the external storage system. When you want to set the
remote command device, you can use the port for which
the Initiator/External MIX mode has been set. Attribute
Port Operation Window 63