HP StorageWorks XP Remote Web Console Software - Manual (Page 133)

Table 66 Parameters for the ICKDSF Command (in Version 2)
Description Value Parameter Command
Sets the JCL statement
identifying the volume. If the
OS of the host server is
MVS, this parameter or the
UNITADDRESS parameter is
required. JCL statement DDNAME or DNAME FLASHCPY QUERY
Sets the SYSNAME in the
ASSGN system control
statement. If the OS of the
host server is VSE, this
parameter is required. SYSNAME SYSNAME
Specifies the device number
(device address) of the
S-VOL on which you want to
perform the FLASHCPY
QUERY
command. If the OS
of the host server is MVS,
this parameter or the
DDNAME parameter is
required.
Source device number UNITADDRESS, UNITADDR,
or UNIT
Specifies the CU number, the
LDEV number, or the device
number of the S-VOL when
you use the Remote
FlashCopy function. CU number
LDEV number
Source device number
SOURCEVOL or SRCVOL
Sets the JCL statement
identifying the volume. If the
OS of the host server is
MVS, this parameter or the
UNITADDRESS parameter is
required. JCL statement DDNAME or DNAME FLASHCPY QUERY
RELATIONS
Sets the SYSNAME in the
ASSGN system control
statement. If the OS of the
host server is VSE, this
parameter is required. SYSNAME SYSNAME
Specifies the device number
(device address) of the
S-VOL on which you want to
perform the FLASHCPY
QUERY
command. If the OS
of the host server is MVS,
this parameter or the
DDNAME parameter is
required.
Source device number UNITADDRESS, UNITADDR,
or UNIT
Displaying Information on Version 2 Pairs: FLASHCPY QUERY
To see the information about the Version 2 pair, execute the ICKDSF FLASHCPY QUERY command.
See
“FLASHCPY QUERY Command Execution” (page 133) .
Figure 87 FLASHCPY QUERY Command Execution
FLASHCPY QUERY UNIT(X'7000')
Viewing Information for a Version 2 Relationship 133