HP StorageWorks XP Remote Web Console Software - Manual (Page 86)

Table 50 Parameters for the FCESTABL Command (Version 2/Volume Copying) (continued)
Description Value Parameter
Establish a relationship including all the
tracks in the volume. If you specify YES
for this parameter and COPY for the
MODE parameter, the relationship will
be maintained even after the
background copying process is
completed, and the differential data
between the S-VOL and the T-VOL will
be managed. As long as the
relationship is maintained, you cannot
update the T-VOL.
The differential data between the S-VOL
and the T-VOL will be copied when you
execute the FCESTABL command with
INCREMENTAL parameter specified or
you execute the FCESTABL command
(Reverse Restore) with the S-VOL and
the T-VOL reversed.
YES INCREMENTAL
Relationship will be deleted after the
background copying process is
completed. The default setting of this
parameter is NO. No
To be specified when the Version 2
T-VOL and the TrueCopy for Mainframe
M-VOL are shared (or Universal
Replicator for Mainframe P-VOL are
shared). Yes TGTPPRIM
To be specified when the Version 2
T-VOL and the TrueCopy for Mainframe
M-VOL are not shared.
NO is the default setting.
NO
Specifies the device number (device
address) of the T-VOL on which you
want to perform the FCESTABL
command. To specify this number, use
the TDEVN parameter.
YES is the default setting.
YES TGTUCB
Specifies the serial number, the CU
number, and the LDEV number of the
T-VOL on which you want to perform
the FCESTABL command. To specify
this number, use the TARGET parameter
instead of TDEVN. NO
Specifies the serial number, the CU
number, and the LDEV number of the
T-VOL on which you want to perform
the FCESTABL command.
Use this parameter when TGTUCB is
NO.
Serial number, CU number, LDEV
number of the T-VOL TARGET
Uses the Remote FlashCopy function to
establish a relationship. YES REMOTE
Does not use the Remote FlashCopy
function.
NO is the default setting.
NO
86 Performing Version 2 Operations