HP StorageWorks XP Remote Web Console Software User Manual
Page 134
“FLASHCPY QUERY Command Execution Result” (page 134)
shows an example of information
displayed as a result of executing the FLASHCPY QUERY command.
Figure 88 FLASHCPY QUERY Command Execution Result
FLASHCOPY VOLUME CAPABILITY INFORMATION TABLE
MAXIMUM MAXIMUM
EXISTING ALLOWED RELATIONS
RELATIONS RELATIONS EXCEEDED CAPABILITY
--------- --------- --------- ----------
1 1000 NO SRC CAP
TGT CAP
CAPABILITY LEGEND
ASY PVOL = ASYCHRONOUS PPRC REMOTE COPY PRIMARY
CC SRC = CONCURENT COPY SOURCE
INACCESS = VOLUME INACCESSIBLE, DATA NOT OBTAINABLE
INHIBIT = FLASHCOPY INHIBITED O. THIS VOLUME
MAX EXCD = MAXIMUM RELATIONS EXCEEDED AT VOLUME OR ESS LEVEL
NEITHER = VOLUME NEITHER FC SOURCE NOR FC TARGET CAPABLE
PPRC PRI = PPRC PRIMARY
PPRC SEC = PPRC SECONDARY
PHASE 1 = PHASE 1 (VERSION 1) RELATIONSHIP EXISTS O. VOLUME
SRC CAP = FLASHCOPY SOURCE CAPABLE
TGT CAP = FLASHCOPY TARGET CAPABLE
XRC SRC = XRC SOURCE
“Information Displayed By the FLASHCPY QUERY Command” (page 134)
describes the meaning
of information displayed as a result of executing the FLASHCPY QUERY command.
Table 67 Information Displayed By the FLASHCPY QUERY Command
Meaning
Displayed content
Displayed Item
Displays the number of relationships in
the specified volumes.
Number of relationships
EXISTING RELATIONS
Displays the maximum number of
relationships that can be created in the
specified volumes.
Number of relationships
MAXIMUM ALLOWED RELATIONS
The number of relationships in the
specified volume does not reach the
maximum number of relationships that
can be created in the specified volume.
NO
MAXIMUM RELATIONS EXCEEDED
The maximum number of relationships
that can be created in the specified
volume is already created.
YES(VOL)
The maximum number of the
relationships that can be created in the
storage system is already created.
YES(ESS)
The specified volume can be specified
as the S-VOL of the Version 2.
SRC CAP
CAPABILITY
The specified volume can be specified
as the T-VOL of the Version 2.
TGT CAP
The specified volume cannot be
specified as the S-VOL nor T-VOL of the
Version 2.
NEITHER
The specified volume is the copy source
volume of TrueCopy for Mainframe.
PPRCOPY PRI
134
Performing Version 2 Operations