HP StorageWorks XP Remote Web Console Software User Manual
Page 114
, the relationship established with Dataset 3 is withdrawn. There are two relationships
before executing the FCWITHDR command; after executing the FCWITHDR command there is only
one relationship.
Figure 66 FCWITHDR Command Processing (TDEVN Specified, DDSW = NO, XTNTLST Specified)
(for Example 2A)
“Example 2B: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST
Specified)” (page 114)
is another example of the command description for Case 2. Similar to the
previous example, this example requests the withdrawal of all the relationships established with
the copy target extents included in the specified extents within the device numbered 4203.
Figure 67 Example 2B: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST
Specified)
FCWITHDR TDEVN(X'4203') XTNTLST(X'00000000' X' 0000000E' X'20000000' X' 2000000E')
By executing the command described in
“Example 2B: FCWITHDR Command Description (TDEVN
Specified, DDSW = NO, XTNTLST Specified)” (page 114)
, the relationship established with the
specified target, Dataset 3, is not withdrawn because the specified extent within the device numbered
114
Performing Version 2 Operations