HP StorageWorks XP Remote Web Console Software - Manual (Page 51)

Figure 27 Copying Version 2 pairs
Establish the Version 2 relationships by specifying the following:
•
M-VOL of TCz#1 in DKC#1 as S-VOL
•
M-VOL of TCz#2 as T-VOL
•
R-VOL of TCz#1 in DKC#2 as S-VOL
•
R-VOL of TCz#2 as T-VOL
Then start the copying process (both copies are not synchronized). The state of each TCz pair is
retained as Duplex at this time. The data is copied in each Version 2 pair, and the data is not
copied in TCz. If the Version 2 pair is released by issuing Withdraw command, M-VOL and R-VOL
in TCz#2 becomes inconsistent.
Preserve Mirror FlashCopy Function 51