HP StorageWorks XP Remote Web Console Software - Manual (Page 113)

By executing the command described in “Example: FCWITHDR Command Description (for Case
1)” (page 112) , the relationship established with the specified target, Dataset 3, in the device
numbered 4203, is withdrawn (see “FCWITHDR Command Processing (TDEVN Specified, DDSW
= NO) (for Case 1)” (page 113) ). However, the relationship established with Dataset 4 is not
withdrawn because it is specified as the dataset source. There are two relationships before executing
the command, and only one relationship after the command is executed.
Figure 64 FCWITHDR Command Processing (TDEVN Specified, DDSW = NO) (for Case 1)
Case 2: TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
The relationships included in the extents specified by the XTNTLST parameter are withdrawn. The
relationships that are only partly included in the specified extents are not withdrawn.
“Example 2A: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST
Specified)” (page 113)
is an example of the command description for Case 2. This example requests
the withdrawal of all the relationships established with the copy target extents included in the
specified extents within the device numbered 4203.
Figure 65 Example 2A: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST
Specified)
FCWITHDR TDEVN(X'4203') XTNTLST(X'00000000' X' 03000000E' X'20000000' X' 2300000E')
In this case, the specified extents in the device numbered 4203 are contained in Dataset 3 (see
“FCWITHDR Command Processing (TDEVN Specified, DDSW = NO, XTNTLST Specified) (for
Example 2A)” (page 114)
). Therefore, by executing the FCWITHDR command described in “Example
2A: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST Specified)”
Releasing a Version 2 Relationship 113