Changing or viewing lu path settings, Deleting lu paths – HP StorageWorks XP Remote Web Console Software User Manual
Page 100
7.
Click OK. Settings are applied to the array, and LU paths are defined.
Changing or viewing LU path settings
Deleting LU paths
CAUTION:
•
Do not remove LU paths when host I/O is in progress.
•
Before deleting a path to a NAS user LU, you must release the device file for the user LU if the
device file is already reserved as the copy destination of a file system. For more information about
releasing and reserving a device file, see the
NAS Backup Restore User's Guide.
1.
Start XP LUN Configuration and Security Manager Software. The XP LUN Configuration and
Security Manager Software pane (
or
) appears.
2.
In the tree, double-click a port. Host groups or iSCSI targets corresponding to that port appear.
3.
In the tree, select a host group or iSCSI target. The LU Path table displays information about LU
paths associated with the selected host group or iSCSI target.
4.
In the LU Path table, select one or more LUNs to which volumes are assigned. (If a volume is
assigned to a LUN, columns on the right of the LUN column are not empty.)
XP LUN Configuration and Security Manager Software operations
100