HP StorageWorks XP Remote Web Console Software - Manual (Page 91)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 91
• The resulting iSCSI name exists in the port.
6. Click OK. If a confirmation message appears, click OK. Changes appear in blue in the tree.
NOTE: If you select Apply this change to other ports, too and click OK, a pane appears
( Figure 54 ) listing the host bus adapters to be changed. To make changes, click OK. If not, click
Cancel.
Figure 54 Check iSCSI names dialog box
7. Click Apply. A confirmation message appears.
8. Click OK. Changes are applied to the array.
Deleting host bus adapters from host groups
NOTE: You cannot perform this operation on host groups for NAS ports.
1. Start LUN Manager. The LUN Manager pane ( Figure 14 ) appears.
2. In the tree, right-click a host bus adapter ( ), and select Delete WWN. A confirmation message
appears.
3. Click Yes.
4. Click Apply. A confirmation message appears.
5. Click OK. Settings are applied to the array.
Deleting host bus adapters from iSCSI targets
NOTE: You cannot perform this operation on host groups for NAS ports.
1. Start LUN Manager. The LUN Manager pane ( Figure 15 ) appears.
2. In the tree, right-click a host bus adapter ( ), and select Delete iSCSI Name. A confirmation message
appears.
3. Click YES.
4. Click Apply. A confirmation message appears.
5. Click OK. Settings are applied to the array.